-
ROF Si photondetector avalanche photodiodes free running single photon detector
This product is a visible light band single photon detector（Photodetector）. The core device uses SiAPD, integrates optical, structural, electrical and software technologies, and has the characteristics of high detection efficiency, strong maintenance and strong environmental adaptability. It is widely used in the fields of single photon Lidar, fluorescence detection, single photon imaging and quantum key distribution. This product uses Si avalanche photodiodes operating in Geiger mode for single photon detection in visible wavelengths. Among them, the typical detection efficiency of 850nm single photon is >50%, dark count
<150cps, after pulse ≤5.5%, time jitter < 500ps. In addition, for specific application scenarios, support for the refrigeration target temperature, dead time and other parameters of the user configuration function to strengthen the detection efficiency, saturation count rate and other specific indicators. -
Rof EOM Intensity Modulator 20G thin film lithium niobate modulator
Thin film lithium niobate intensity modulator is a high-performance electro-optical conversion device, which is independently developed by our company and has complete independent intellectual property rights. The product is packaged by high-precision coupling technology to achieve ultra-high electro-optical conversion efficiency. Compared with the traditional lithium niobate crystal modulator, this product has the characteristics of low half-wave voltage, high stability, small device size and thermo-optical bias control, and can be widely used in digital optical communication, microwave photonics, backbone communication networks and communication research projects.
-
Rof EO modulator Phase Modulator 20G thin film lithium niobate modulator
Thin film lithium niobate phase modulator is a kind of high performance electro-optical conversion device. The product is packaged by high precision coupling technology to achieve ultra-high electro-optical conversion efficiency. Compared with the traditional lithium niobate crystal modulator, this product has the characteristics of low half-wave voltage, high stability and small device size, and can be widely used in digital optical communication, microwave photonics, backbone communication networks and communication research projects.
-
Rof EOM modulator thin film lithium niobate modulator 40G Phase Modulator
Thin film lithium niobate phase modulator is a kind of high performance electro-optical conversion device. The product is packaged by high precision coupling technology to achieve ultra-high electro-optical conversion efficiency. Compared with the traditional lithium niobate crystal modulator, this product has the characteristics of low half-wave voltage, high stability and small device size, and can be widely used in digital optical communication, microwave photonics, backbone communication networks and communication research projects.
-
Rof EOM modulator 40GHz Phase Modulator thin film lithium niobate modulator
Thin film lithium niobate phase modulator is a kind of high performance electro-optical conversion device. The product is packaged by high precision coupling technology to achieve ultra-high electro-optical conversion efficiency. Compared with the traditional lithium niobate crystal modulator, this product has the characteristics of low half-wave voltage, high stability and small device size, and can be widely used in digital optical communication, microwave photonics, backbone communication networks and communication research projects.
-
Electro-optic modulator Mini 10~3000MHz Analog Wideband Transceiver Module Optical Transmission modulator
The ROF Series Small analog wideband transceiver module is a low-cost, high-performance analog wideband transceiver with a very wide dynamic range, designed specifically for fiber optic RF applications. A pair of transceivers will create a two-way RF to optical and optical to RF conversion and transmission link that can provide a high spurious-free dynamic range (SFDR), operating at frequencies from10MHz to 3GHz. The standard optical connector is FC/APC for low back reflection applications, and the RF interface is via a 50 ohm SMA connector. The receiver uses a high-performance InGaAs photodiode, the transmitter uses a linear optically isolated FP/DFB laser, and the fiber uses a 9/125 μm single-mode fiber with an operating wavelength of 1.3 or 1.5μm. -
Mini 0.6~6GHz Analog Wideband Transceiver modulator Analog Broadband Optical Receiver
The Mini analog wideband transceiver module(Fiber Optic Transmitter) is a low-cost, high performance analog wideband transceiver with a very wide dynamic range, designed specifically for optical fiber RF applications. A pair of transceivers will create two-way RF to optical and optical to RF conversion and transmission links that can provide high spurious free dynamic range(SFDR), operating at frequencies from 0.6GHz to 6GHz. The standard optical connector is FC/APC for low back reflection applications, and the RF interface is via a 50 ohm SMA connector. The receiver uses high performance InGaAs photodiode, the transmitter uses linear optical isolation FP/DFB laser, and the optical fiber uses 9/125 μm single-mode fiber with working wavelength of 1.3 or 1.5μm. -
Mini 0.6~6GHz Analog Wideband Transceiver Module Optical Transmission Link Fiber Optic Transmitter
The Mini analog wideband transceiver module(Fiber Optic Transmitter) is a low-cost, high-performance analog wideband transceiver with a very wide dynamic range, designed specifically for optical fiber RF applications. A pair of transceivers will create two-way RF to optical and optical to RF conversion and transmission links that can provide high spurious free dynamic range (SFDR), operating at frequencies from 0.6GHz to 6GHz. The standard optical connector is FC/APC for low back reflection applications, and the RF interface is via a 50 ohm SMA connector. The receiver uses high performance InGaAs photodiode, the transmitter uses linear optical isolation FP/DFB laser, and the optical fiber uses 9/125 μm single-mode fiber with working wavelength of 1.3 or 1.5μm.
-
Rof 200M Photodetector Avalanche Photodiode Detector Avalanche Photodetector
The high sensitivity Photodetector is mainly composed of ROF-APR series APD Photodetector (APD photoelectric detection module) and HSP low speed high sensitivity module, which has high sensitivity and wide spectral response range and can provide different sizes of packages according to customer requirements.
-
ROF Optical Detector Avalanche Photodetector Module APD Photodetector
The high sensitivity avalanche photodetector is mainly composed of ROF-APR series APD Photodetector (APD photoelectric detection module) and HSP low speed high sensitivity module, which has high sensitivity and wide spectral response range and can provide different sizes of packages according to customer requirements.
-
Rof Electro-optic modulator LiNbO3 MIOC Series Y-Waveguide Modulator
The R-MIOC Series Y-Waveguide Modulator is a LiNbO3 multifunctional integrated optical circuit (LiNbO3 MIOC) based on microelectronic technology, which can achieve polarizer and analyzer, beam splitting and combining, phase modulation and other function. The waveguides and electrodes are fabricated on LiNbO3 chip, the output and input fibers are precisely coupled with the waveguides, then the whole chip is encapsulated in a gold-plated Kovar housing to obtain well performance and high reliability.
-
ROF High Sensitivity APD Photodetector Light Detection Module avalanche photodetector
The high sensitivity avalanche photodetector is mainly composed of ROF-APR series APD Photodetector (APD photoelectric detection module) and HSP low speed high sensitivity module, which has high sensitivity and wide spectral response range and can provide different sizes of packages according to customer requirements.
